Features

Cabothane Polyurethane Floor Finish adds beauty and maximum protection to floors. This extremely durable finish remains flexible and withstands tough, high-traffic areas like stairs and gym floors. It is resistant to scuff marks, mars, scratches and virtually all household chemicals.

Coverage

One gallon covers up to 500-650 sq. ft. (46-60 m²) depending upon surface porosity. Do not thin.

Where to Use

Suitable for use on all types of wood flooring such as oak, pine, fir, birch, aspen, maple, cypress, mahogany and redwood. This product is professional quality, super-fast drying and is the ultimate protection. Do not use on plastic laminate floors or pre-finished factory wood flooring.

Preparing Your Surfaces

General: Clean and dry surface thoroughly, removing all dirt, dust, wax and wood marks. Remove gloss with sandpaper or liquid gloss remover.
New or Stained Wood: Smooth wood lightly with sandpaper. Stain, if desired, allow to dry overnight and sand lightly again. Remove sanding dust before finishing.
Painted or Varnished Wood: Remove all paint and varnish in poor condition with sandpaper or paint and varnish remover following manufacturer's instructions and safety precautions. Then, follow new wood instructions. Varnish in good condition merely needs to be clean and have the gloss dulled.

Application

DO NOT SHAKE! Stir well before using. Before applying the finish to the entire surface, check effect by testing on an extra piece of the same wood or by applying to a hidden part of the object. Apply a uniform, thin coat using a high quality, clean polyester brush or pad applicator. Do not apply with a roller. Brush in even strokes in the direction of the wood grain. Allow to dry 2-3 hours. Sand lightly and remove all sanding dust before applying additional coats.